[ Follow Ups ] [ Post Followup ] [ Hot Rod BBS ]

Posted ByJack on January 15, 2003 at 17:48:42:

I have purchased a Flame thrower kit from Hotrod and it works perfectly.
I have it now for 5 months.(in my 1962 corvette)
I have a friend with a 2002 Mitsubishi Mirage that wants to setup the flames like gone in 60secs or fast&furious.
I have another flame thrower kit and I have a nitous kit from nitrous works that was used EFI cars on the throttle body.(nozzle)
How can I hook this up for shooting big flames?
We have no laws here about flames out of car , so don't worry about that.
I know if I hook the solenoids of the nos to the same button, use a direct 12v source, instead of the front ignition(so the cars engine doesn't cut off). The nozzle should go just before the sparkplug .At what distance should the the gas nozzle(what kind do i need) should be from the sparkplug ?What do I need to do to prevent the flames from coming back in the solenoid and gasbottle? And what else will I need to finish this setup.(what type of gas do I have to buy?)
Please help me out,
I don't care how much it will cost for the setup. I want to shoot flames!
Jack , owner of:
1962 Corvette, 1973 Corvette, 1971 Camaro

Follow Ups

Post Followup




Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ Hot Rod BBS ]