Posted ByJohn Mackey on August 02, 2003 at 09:19:56:
In Reply to: Re: Hemi ForSale!!!! posted byJohn Mackey on August 02, 2003 at 09:18:54:
: : 1957 392 HEMI
: : BORED .040 SHORT POORED HARD BLOCK.
: : MASTODON BILLET SPLAYED MAINCAPS, 5140 NITRATED CRANK, .010/.010 CLEVITE BEARINGS.
: : HOWARDS ALUMINUM +.100 RODS, ARIAS PISTONS, TOOL STEEL BUTTON TYPE PINS, C&A RINGS, MILODON HEMI OIL PUMP, CUSTOM CRANE ROLLER CAM, PROLITE LIFTERS, SMITH BROS. PUSH RODS, A.R.P. HEAD STUDS,S.C.E. COPPER HEAD GASKETS,
: : O-RINGED BLOCK, 354 HIGH PORT HEADS, MANLEY S/S VALVES, 2.19 IN., 1.80 EX., FULL PORTING JOB, CRANE SPRINGS, MOLY RETAINERS,
: : CUSTOM SHEET METAL INTAKE,
: : 2/ 4BRL. HOLLEY 650 DOUBLE PUMPERS, 250 HP. NITROS PLATE SYSTEM, CUSTOM BILLET DISTRIBUTOR, M.S.D. CRANK TRIGGER, TAYLOR WIRES, “HOT HEADS" ALUMINUM VALVE COVERS, VALLEY COVER & TIMING COVER, BHJ BALANCER/ SFI APPROVED, CUSTOM BUILT FLEXPLATE,
: : CSI GEAR REDUCTION STARTER MOUNTED TO
: : 3/8” ALUMINUM MIDPLATE.
: : MOTOR IS 15.2:1 COMPRESSION, UP TO 800 HP. ON NITROS, CURRENTLY IN DRAG HYDRO, HAS 15 TUNING PASSES SINCE COMPLETED…. THIS IS A COMPLETE MOTOR PACKAGE, FRONT TO BACK, TOP TO BOTTOM…. WOULD MAKE AN AWSOM STREET ROD OR NOSTALGIA DRAG CAR, OR V-DRIVE BOAT SET-UP…… 12 YEARS TO BUILD, 28,000 COST 15,000 O.B.O. PRICE CUT TO $8000.00 MIKE SAYS HE NEEDS THE MONEY TO FINISH UP OTHER PROJECTS IN THE WORKS!!! CALL HIM AT, Mike cline,
: : CLINE EXTREME WATERCRAFT: 407-384-1868