Posted Byles on August 14, 2003 at 11:47:23:
In Reply to: Chevy, Ford, Mopar Parts For Sale posted byKen on May 05, 2003 at 22:03:32:
: For Sale: Aluminum cased Hemi 4-speed crash box transmission modified to fit a small block Chevy. It has the Hemi input shaft that has been machined down to fit a small block Chevy with adapter plate, big output shaft, and has a 2.66 first gear. This is a rare piece, if wanting to put in your Mopar then the only thing needed is lengthen or replace the input shaft. If racing a small block Chevy and need a tough 4-speed then this one's ready to go. The part number on the case is 2801176 with a "WB" just below it. This was rebuilt and every single interior component is brand new, nothing used and hasn't been used since the rebuild. Asking $1500 but would like to make room in my garage so all serious offers accepted.
: For Sale: Performer RPM intake for a 289-302 Ford. Excellent condition with no stripped threads, just bead blasted and ready to install. Asking $85 OBO.
: For Sale: Complete 300 6cyl. Ford race motor w/roller cam, rockers, etc. Went 8.70's @ 145 MPH. $2500. Home made tri-power intake w/3 Holley #7448 350cfm carbs, needs linkage, $400. Clifford tri-power intake manifold, three 40mm Webber carbs, various roller rockers in 1.5, 1.6, 1.7, and 1.8 ratios, some roller cams in various duration's, lift, and lobe separations. Call 440-834-8565 or email@example.com
: For Sale: factory 31-spline posi for 1988 and newer 8.8" Ford truck rear ends and it has provisions for ABS brakes. This was just gone through and checked out fine. It is in excellent condition and ready to use, Asking $150.
: For Sale: Ford/Sterling 10-1/4" posi unit. This fits 3/4 ton and up Ford trucks with 10-1/4" rear ends. This posi has just been checked and is in excellent shape with no worn parts, gears, clutches, etc, and is ready to install and use. This is not a cheap item to buy new, it lists for nearly $400 before tax and shipping. Asking $125 OBO.
: For Sale: Factory12-Bolt Chevy car posi. It has just been gone through, checked, and is a perfect posi ready to use. It's a series #4 and will work with 4.10 and up standard gears or will work with a "3.73 thin gear". Asking $225 OBO.
: For Sale: Factory 3.23 ring & pinion for a 7.5" 10-Bolt Chevy, the gears are in excellent condition. Asking $75 OBO.