Posted Bythemark252 on March 18, 2002 at 12:22:09:
In Reply to: Re: I need cylinder head torque specs posted by. on February 24, 2002 at 21:25:22:
: : Can anyone give me the proper torque specs and procedure for a 90 plymouth laser 2.0 liter DOHC non turbo? Thanks!
: 65-72 ft. lbs.
Facing the engine from the front of the car, the right side is the driver's side (duh, but this is backwards from the way you normally use right-side left-side on cars).
1) Center front. 2) Center rear. 3) Right one from center front. 4)Left one from center rear. 5) Right one from center rear. 6) Left one from center front. 7) Right rear corner. 8) Left front corner. 9) Right front corner. 10) Left rear corner. 11) Spout obcenities at your torque wrench for slipping off and skinning your knuckles.