Posted ByGoth Camino on June 25, 2002 at 01:21:55:
In Reply to: Re: exhaust flame throwers posted byPAUL MARTINEZ on June 11, 2002 at 11:32:52:
Dude.... for the most inexpensive flame thrower kit. all you have to do is buy a good toggle switch a good amount of ignition wire, and a good sparkplug... drill a hole about 5 inches back from the end of the exhaust pipe, place the spark plug there. put an end of the wire to the spark plug. then run the wire to the switch. then run another piece of wire from the switch to the posotive terminal on your car baterry.... then all you have to do is start your car.... reve it up and flip the switch... and voila, tailgaters nightmare.... enjoy.... depending on how clean your engine runs depends on the flame length.... i can get about 20 feet on a high rev.... your welcome..