Acura MDX M&G Brake  mounting plate for the ABS unit.

ABS Re-location mounting plate to lower the ABS unit in the MDX vehicle for added clearance to move the master cylinder forward 4" to accommodate the M&G brake unit.  this is a stainless steel plate that will take the OEM rubber mounts.  1 stud will be removed to make clearance for the electrical plug and that mount will go where a plastic wire retainer gets removed and a bolt & nut get installed.

Click on picture for larger view.

The black plate gets replaced with the Stainless plate to the right.  this will make the job a lot easier and make a nice clean installation.

Call for Base Plate Car, SUV & Pick-Up applications.

[ Home ] [ Up ]

Berea Automotive Engineering Corp.
212 Depot Street
Berea, Ohio 44017, (Cleveland)
440-234-6810 or Fax 440-234-6674
5.6 miles off the Ohio Turnpike exit 161
2.9 miles from Cleveland Hopkins Airport
7 tenths mile from Browns Training Center
We can offer 50amp, Water & WiFi + dump
In case you need to spend the night.

Contact Chuck with your questions
Click for Map to the shop.

Last modified: 03/27/08